Infinix Zero 3 (X552) Tested Firmware Free Download Without Credit 100% Working By Javed Mobile

Infinix Zero 3 (X552) Tested Firmware Free Download Without Credit 100% Working By Javed Mobile

Infinix Zero 3 (X552)

How To Flash:

1. Download Sp Flash Tool and extract it
2. Download Stock Firmware you wish to flash and extract it
3. Switch off your smart device
4. Now click "Flash_exe" to launch the Sp Flash Tool
5. Click download tab and click the scatter loading button to load 
6. scatter file
7. Scatter file is located in the firmware file
8. Click on the "download icon" to launch the flashing process
9. Then connect your smart device and click volume up or down button to 
10. ease the computer to recognize the smart device
11. Wait for about 10 minutes, after a successful operation a message 
12. will be displayed along with a green circle.
13. How To Flash Custom ROM Using Sp Flash Tool
14. Download the relevant Custom ROM for you android MediaTek device
15. Unzip the folder
16. Start your computer in “Device driver signature disabled” mode
17. Install MediaTek USB-VCOM drivers
18. Launch Sp Flash Tool in “Administrator Mode”
19. Next, click “Scatter-loading” and load the scatter file that is 
20. located in the firmware file
21. Now select the “Download Agent” go to the Sp Flash Tool folder and 
22. select “MTK_AllInOne_DA.bin”
23. After the above steps go to the”Format” tab and check the validation
24. Now switch off your device and connect
25. Then click start and to format the device
26. Next, disconnect the device and click on the download button under 
27. the download tab
28. Again connect the device
29. Then the custom ROM installation will begin and wait for about 10 
30. minutes A green tick will appear after successful installation.

Download Link:Link

Javed Mobile
JavedMobile